Fun 'n' stitch!

Feeling creative recently, I tried out some new knitting stitches from a knitting book.  Being pleased with the results, I decided to incorporate them into some of my latest items.

Showcasing below is King Charles Brocade on the front of the mini hot water bottle:

This took lots of concentration until I'd done a few rows....and then it seemed to be a bit like crazy paving until the final result when I could stand back and see that there was a perfectly formed pattern in there!

Next up is rick rack rib stitch which brings a whole new dimension to what you and I call rib stitch.  Fun to do and looks good. Take a peep at the phone cover in the foreground.

What new stitches have your tried of late that have worked for you?

what I'm working on at present - mini hot water bottle covers

The next craft fair is on Sat 31st March 2012, so the knitting needles have been busy, busy, busy.

Here's some pics of the two mini hot water bottle covers that I've been creating - hot water bottle included in the price!

There's lots of detail in the work, created using my own design.  I start at the opening, making the button holes.  I then knit the rest of the first side, shaping at the neck of the water bottle.  Next come the holes to thread the ribbon through (knit two together and then yarn over to make another stitch). 

Single rib follows for the top of the water bottle cover to ensure that it stretches over the top. 

The second half is the same pattern minus the additional flap for the button holes.  I then create my design to attach to the front, such as a heart, and sew this on. 

The buttons go on next.  It's then sewn up - not forgetting to leave the bottom bit open so that the water bottle can be put in!!

Last but not least is the ribbon - I thread it through with the needle with the biggest eye that I can find!  Once in situ, I then fold over and catch the ribbon ends to prevent fraying.

Tie the ribbon for the final touch and then take some fab pics!

If you would like to order one (every one is unique), please get in touch to discuss your requirements.

*****Stop press*****

A lovely lady from Bristol bought the red and blue one at yesterday's Wookey Village Fair.  She fell in love with it, promised that she'd give it away as a pressie.......whilst being equally sure that she loved it too much to ever part with it!!

How to make a wooden beaded watch

Please give full credit to Mosaic Tree if you use this design.  Use for personal purposes only.

Beaded watch make - wrist watch with wooden beaded strap on elastic

Instructions

What you need

·        Sharp scissors

·        2 x plastic clips (eg the ones used for freezer bags) – referred to by their colours (green and yellow) throughout these instructions.

·        Tweezers (to pick up small beads)

·        Watch face for beading*

·        Craft elastic c50cm* (comes in variety of colours on Ebay)

·        Shank button (button with loop underneath)

·        Selection of beads (c70) in your chosen colour theme* – selection of colours, shapes, sizes (max 1cm in diameter, max 1.5cm length) wooden, upcycled is good!

*   Try www.ebay.co.uk  for all these items.

Warning! Beads can present a choking hazard, particularly for young children. 

Keep watch away from water as the colour in some beads may leach when wet.

1.     Thread elastic through loop at one end of watch face and secure with green clip. 

At the end of this make, you will have 4 beaded strands which form the watch strap. 

2.     You are now going to start Strand 1.  This will be the end of the elastic without the green clip on it.

Thread 10-12 beads (child/small adult wrist), 12-14 (medium size), 14-15 beads (large size wrist).  Put 1-2 smaller beads on at end.  These will be hidden under the shank button and, if smaller, will be more comfortable for the wearer.

Now thread the end of elastic from strand 1 through the shank button.  At this point after the button, Strand 1 becomes Strand 2.  Remember that the underside of the watch face will face the loop of the shank button when worn on the wrist.

3.     Strand 2 – Thread beads onto Strand 2.  Ensure that it measures the same length as Strand 1.  If necessary add or remove a small bead to Strand 2 to do this.

4.     Thread end of Strand 2 through 2^nd hole of watch face.  It should be going in the same direction as the elastic in the 1^st hole in the watch face (from right to left in this example).         

        

Pull tight and secure end with clip.

5.     Strand 3 – The elastic secured with yellow clip will now form Strand 3.  AS the end of this elastic is too short, you will need to move the beads, button and watch face along to give it more length (you need enough enough elastic for the beads and to tie it off in Step 7).

Remove yellow clip and thread Strand 3 with beads.  Check it is the same length as Strands 1 and 2. 

Pull Strand 3 tight and hold in place with yellow clip.

6.     Strand 4 – Remove green clip; this will be Strand 4.   Thread with beads until the same length as the other strands.  Thread through the button the opposite way to Strand 3. 

7.     Remove both clips. Pull ends tight and knot at the shank button.  Do not trim ends yet.

8.     Try the watch on in case any adjustments need to be made.  Stretch the knot and straps so that the elastic is already tightened.  Now you can trim the loose ends.  You will note that the knot is now hidden on the wrist side under the button.  You are now finished and this is what it looks like!